What functions are needed for cabinet design? Which cabinet hinge is good and how to choose

2021/05/06

What functions do cabinet design need? The cabinet is mainly composed of five parts: cabinet body, door panel, hardware, countertop, and electrical appliances. Its functions are mainly embodied in storage, scrubbing and cooking. Hinge is a very important piece of hardware that reflects the quality of the cabinet. So which one is the best hinge for the cabinet to choose? Next, this article will explain it to everyone.

Which functions are needed for cabinet design? How to choose cabinet hinges?

Which functions are needed for cabinet design? The cabinet is mainly composed of five parts: cabinet body, door panel, hardware, countertop, and electrical appliances. Its functions are mainly embodied in storage, scrubbing and cooking. Hinge is a very important piece of hardware that reflects the quality of the cabinet. So which one is the best hinge for the cabinet to choose? Next, this article will explain it to everyone.

What functions are needed for cabinet design?

1. Cabinet design

(1) Cabinet: including wall cabinets, floor cabinets, decorative cabinets, mid-high cabinets, Countertops, etc.;

(2) Cabinet doors: wooden doors, aluminum alloy doors, rolling doors, sliding doors, etc.;

(3) Decorative panels: including partitions , Top board, top line board, back wall decoration, etc.;

(4) Countertops: artificial stone, fireproof board, artificial quartz stone, stainless steel countertops, natural stone countertops, etc.;

( 5) Anchor: Including anchor board, adjusting anchor, connecting parts, etc.;

(6) Hardware accessories: including door hinges, guide rails, handles, hanging codes, and other structural accessories, decorative accessories, etc.

2. Functional design

(1) Functional accessories: including basins, faucets, water dispensers, soap dispensers, various pull baskets, pull racks, racks, rice boxes , Trash cans, etc.;

(2) Lamps: including laminate lamps, ceiling lamps, various built-in and external cabinet lights, etc.

(The picture comes from the Internet, invaded and deleted)

How to choose which cabinet hinge is better

1. Hinge function

p>

The hinge in the cabinet must not only accurately connect the cabinet body and the door panel, but also bear the weight of the door panel alone. In actual use, cabinet doors are opened and closed tens of thousands of times, and during frequent opening and closing, the consistency of the door arrangement must be maintained, so the quality of the hinge is a test.

2. Hinge selection

(1) Hinges generally have two-point card positions and three-point card positions, among which the three-point card position hinges will be better. At present, most of the common hinges on the market are detachable, and are divided into two parts: a base and a buckle.

When choosing a cabinet, you can also ask the salesperson to remove the door together with the hinge buckle and check the internal quality of the hinge.

(2) When choosing hinges, you should try to choose multi-point positioning hinges. The so-called multi-point positioning means that when the door panel is opened, it can stay at any angle, opening effortlessly, and closing It will also save effort. The positioning of the hinge is also related to the toughness of the reed used in the hardware. Generally, a good-quality reed can make the opening angle exceed 90 degrees.

(The picture comes from the Internet, invaded and deleted)

How to adjust the cabinet hinge

1. Adjust the depth: you can use eccentric screws Directly and continuously adjust the cabinet door;

2, height adjustment: the hinge base can be used to accurately adjust the height adjustment;

3, the door coverage distance: if the door coverage is required If the distance becomes smaller, you can turn the screw to the right; if you want the distance covered by the door to be larger, you can turn the screw to the left.

4. Adjust the spring force: You can also adjust the opening force of the cabinet door and rotate the hinge one circle. The screw can be adjusted and the spring force can be reduced to about 50%.

Detailed adjustment method of cabinet hinge

1. Front and rear adjustment of common hinge seat: You can adjust the position of the front and rear sliding hinge arm by loosening the fixing screw on the hinge seat. There is an adjustment range of 2.8mm. Note that after the adjustment is completed, the screws must be tightened again.

2. The front and rear adjustment of the cross-shaped quick-release hinge seat: On the cross-shaped quick-release hinge seat, there will be an eccentric cam driven by a screw. The rotating cam can be adjusted between -0.5-+2.8mm It can be adjusted within the range, and there is no need to loosen other fixing screws during the adjustment process.

The above is an explanation of the relevant knowledge of cabinet decoration design in this article, I hope it will be helpful to everyone!

(The article comes from the Internet, invaded and deleted)

[Extended reading]

How to decorate a semi-open kitchen?

>

What are the details to pay attention to when decorating the kitchen? What are the precautions for kitchen decoration?

What color is good for the cabinet door panel and what kind of plate should be used for the cabinet door

Debei Kitchen Cabinet

View detailed franchise information> Label: Debei kitchen cabinets to join

Number of stores: 500-1000 Basic investment: 100,000-300,000

Affiliate budget request information
CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
English
Current language:English