More than 2000 kinds of furniture fitting hardwares are available

The small details of the cabinet determine the big effect. Resolute and inferior hinge Say No

by:Hench Hardware     2021-05-07

For kitchen cabinets, consumers are concerned about whether the appearance is beautiful and whether the material is environmentally friendly when purchasing kitchen cabinets. They often ignore the hinges installed at the door of the cabinet. In fact, these small details will determine the service life of the cabinet in the future. Therefore, when buying cabinets, you must say No with inferior hinges!

The small details of the cabinet determine the big effect. Resolute and inferior hinge Say No

For kitchen cabinets, consumers are concerned about whether the appearance is beautiful and whether the material is environmentally friendly when purchasing kitchen cabinets. Ignoring the hinges installed at the door of the cabinet. In fact, these small details will determine the service life of the cabinet in the future. Therefore, when purchasing cabinets, we must resolutely say No with inferior hinges!

The small details of the cabinet determine the big effect. Say No. Resolute and inferior hinge Say No

First, look at the weight of the material

The hinge quality is poor, After a long time, the cabinet door will be easy to close forward and backward, loosen and droop. Almost all major brands of cabinet hardware use cold-rolled steel, which is formed by one-step stamping, with a thick feel and smooth surface. Moreover, due to the thick surface coating, it is not easy to rust, is strong and durable, and has strong load-bearing capacity. Inferior hinges are generally made of thin iron sheet welding, which has almost no resilience. If it takes a long time, it will lose its elasticity and cause the door to close. Lax, even cracking.

Second, look at the details

The details can tell whether the product is good, so as to confirm whether the quality is outstanding. The hardware used in the high-quality wardrobe hardware has a thick hand feel and a smooth surface, which even achieves a mute effect in design. Inferior hardware is generally made of cheap metal such as thin iron sheet, and the cabinet door is stretched jerky and even has a harsh sound. Experience the hand feel Different hinges with different advantages and disadvantages have different hand feelings when used. A hinge with excellent quality has a softer force when opening the cabinet door. When it is closed to 15 degrees, it will rebound automatically, and the rebound force is very uniform. Consumers can open and close the cabinet door more and experience the hand feeling when purchasing.

In addition to visual inspection and hand-feeling of the hinge when selecting the hinge, attention should be paid to the return performance of the hinge spring. The quality of the reed also determines the opening angle of the door panel. A good quality reed can make the opening angle more than 90 degrees. The hinge can be opened 95 degrees, and the two sides of the hinge can be pressed hard by hand to observe that the support spring is not deformed or broken. It is a very strong product with qualified quality. Inferior hinges have a short service life and are easy to fall off. Such as cabinet doors and wall cabinets falling off are mostly caused by poor quality of the hinges.

3. Choose big brands with quality assurance

For example, Blum and Hettich are world-renowned brands. If the hinge design can freely open the cabinet door at an appropriate angle, the spring strength is accurate, the force is very soft when closing the door, the sound is very small, not to worry about pinching fingers, plus the decorative cup cover and decorative arm cover, the overall effect is more beautiful and elegant . Smooth lines. The material has sufficient hardness and heavy load. Popular among consumers.

The small details of the cabinet determine the big effect. Resolute and inferior hinge Say No

Fourth, the hinge depends on the thickness

The hinge is the connection cabinet And the hardware of the door panel, bear the weight of the door panel. Hinges with poor quality can easily cause deformation of the door panel and inconvenience in opening and closing the cabinet. The types of hinges can be roughly divided into three categories: full cover, half cover and inner side. The type of hinge is mainly selected according to the different installation methods. From the appearance point of view, there is not much difference between high-quality hinges and inferior hinges, the only difference is to observe its thickness.

Good hinges are formed by one-time stamping of alloy, with thick hand feeling and smooth surface. Due to the thick surface coating, it is not easy to rust, is stable and strong, and has strong load-bearing capacity, which makes the cabinet door stretch freely and will not appear. The door is not tightly closed. To say that the installation and disassembly is convenient as a quick-installed hinge, it does not need to be drilled on-site, and the door panel will have a position for installing the hinge in advance.

Fifth, choose the handle carefully

As far as the cabinet is concerned, no handle, no matter how beautiful the cabinet is, it can only be embroidered pillows. At present, there are four types of handles on the market: plastic handles, zinc alloy handles, aluminum alloy handles, and stainless steel handles using transfer technology. The zinc alloy handle is the most widely used on the market. The surface coating technology is particularly critical. If the metal coating on the surface is not treated properly, it will easily fall off. Some corrosive seasonings such as soy sauce and salt in the kitchen, and even sweat containing salt on the hands, can make the zinc alloy handles dull.

Plastic handles are not easy to corrode and do not fade, so they can be said to be the most suitable handles for use in the kitchen. The coating on the surface of the plastic handle can be formed arbitrarily, with a strong sense of line and beautiful appearance. It is becoming a new favorite in the handle market.

Six. It is better to choose three-in-one connection parts.

Connectors let the cabinet body connect with the cabinet body. A single cabinet body generally uses 12 connectors. Connectors are usually divided into two types, one is a three-in-one connector; the other is a two-in-one connector. At present, the three-in-one connector is commonly used, also known as the invisible connector. The three-in-one connecting piece is composed of a plastic head, a connecting rod, and a connecting cap. The quality of the connecting rod depends on the accuracy of the connecting rod. The connecting rod accurate to the micron can ensure the accurate splicing of the cabinets. The two-in-one connector is exposed on the outside of the cabinet, which is not beautiful and is generally not used.

Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...