Seven new standards for home building materials are released. How do industry professionals comment?

2021/09/04
In October, a large number of new standards for the home building materials industry were successively released or implemented, covering multiple subdivisions: ceramics, floor cement, hardware sliding doors, hardware pull baskets, overall kitchen cabinets, and so on. Some of these standards have reached the international advanced level, and some indicators have filled the gaps in similar standards at home and abroad and seized the commanding heights of industry competition. As a distributor or manufacturer, mastering these new standards will help to enhance their future development! Compared with the original standards, how are the new standards revised, enriched, optimized, and upgraded? How do people in the industry evaluate it? Please look down!


   Seven new standards for cabinets and home building materials are released. How do industry professionals comment?


   'Household Hardware Sliding Door Pulley System' group standard


   Severe opening and closing, intermittent static load, operating force, durability, sinking amount and corrosion resistance are stricter than the corresponding requirements in the original standard, and the content of harmful substances, main dimensions, and continuous static load have been increased. , Traction, cushioning performance, anti-pinch performance, noise and other forward-looking and advanced indicators.


   Evaluation by industry professionals: It fills the gap of similar standards at home and abroad, and the standards have reached the international advanced level.


   'Ceramic Tile Adhesive' Industry Standard


   Modified the standard name, changed 'Ceramic tile adhesive' to 'Ceramic tile adhesiveAnd definitions; the classification adds A, S, and P categories; increase the curing time of the specimen for 6 hours, and the allowable error of the test time is ±15 minutes; increase the specific requirements for lateral deformation and modify the corresponding test method.


   Evaluation by industry insiders: This standard adopts international standards and reaches the general international level.


   'Cement-based self-leveling mortar for floors' industry standard


   Deleted the 'Introduction' of the original standard; revised the scope and normative references; added the terms and definitions of the surface layer and cushion cement-based self-leveling mortar; added the classification by material use location, and deleted the Classification and labeling of product components; general requirements have been added; technical requirements have been revised, and technical requirements have been proposed based on the surface layer and cushion; the stirring method of sample preparation has been revised, the timing time for testing fluidity has been clarified, and the technical requirements have been revised. Test methods for wear resistance and impact resistance.


  Industry insider evaluation: This standard has reached the domestic advanced level.


   'Waterproof coating film used under the bonding layer of ceramic tiles' industry standard


  The newly formulated product standard stipulates the technical requirements and test methods of the waterproof coating film under the ceramic tile bonding layer in the ceramic tile project, which will play an important role in ensuring the quality of waterproof projects such as toilets, kitchens, swimming pools, and basements. The standard is applicable to the waterproof coating film under the bonding layer of ceramic tiles such as walls, floors and swimming pools.


   Evaluation by industry professionals: The standard preparation work refers to the EN14891:2013 European standard, and introduces the bridging crack test method on the basis of a large number of verification tests, and the standard has reached the international advanced level.


   'Household Kitchen Waste Disposer' Group Standard


   The kitchen waste generated in the daily life of the family is clearly divided into three categories: direct treatment, post-processing and non-disposable; the technical requirements have comprehensively improved the safety requirements of the products. It is stipulated that the sound power level and noise value of the processor should not be greater than 60dB (A) when the processor is running under no load, which greatly improves the noise reduction level of the product; comprehensively standardizes the test items and test methods; The installation location, installation environment, and drainage pipes are included in the standard, and the installation of the processor is regulated.


   Evaluation of industry professionals: The standard provides some forward-looking and advanced indicators, filling the gaps in similar standards at home and abroad. Therefore, the expert group believes that the standard has reached the international leading level.


   'Household functional hardware pull basket' group standard


  The standard specifies the product definitions of functional hardware pull basket products, countertop racks, wall racks, etc. installed on household products; clarifies the classification and design specifications of functional hardware pull basket products for household use; stipulates the selection of materials The detailed technical requirements of the manufacturing process, especially the corrosion resistance and service life are better than similar standards at home and abroad; the installation accessories and maintenance specifications have been added, and the test methods and inspection rules have been clarified.


   Evaluation by industry professionals: The standard provides some advanced indicators and fills the gaps in similar standards at home and abroad. Therefore, the evaluation expert group believes that the standard has reached the international advanced level.


   'Household Stainless Steel Integral Kitchen Cabinet' Group Standard


The    standard adds stainless steel kitchen cabinets, all stainless steel kitchen cabinets, stainless steel door panels, stainless steel countertops and defect terms and definitions on the basis of GB/T 18884-2015; adds appearance requirements for stainless steel primary color door panels and stainless steel paint door panels. The physical and chemical performance requirements of stainless steel countertops and the mechanical properties of stainless steel cabinets are specified; the surface treatment, waterproof performance, and formaldehyde emission of stainless steel kitchen cabinets are clearly required; and the design and installation requirements of the fully disassembled structure are proposed.


   Evaluation by industry professionals: Part of the content of this standard fills in the gaps in similar standards at home and abroad, and the evaluation expert group believes that the standard has reached the international level.
CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
English
Current language:English