Introduction of glass door stainless steel handle: glass door stainless steel handle is larger than other handles used in doors. This is because the glass door material has high transparency, and this design can make the orientation of the handle more conspicuous and convenient for people to use. The handle used in other doors is generally combined with the lock, which means that the door can be locked by the handle. The handle of the glass door only has the function of pushing and pulling, and the lock needs to be installed independently. This is also caused by the glass material itself. Glass door stainless steel handles are generally made of stainless steel. This material is bright and clean, the quality is relatively simple, and it will not cause too much pressure on the door body. And the corrosion resistance is good, and the cleaning is very convenient. Glass door stainless steel handle purchase tips: 1. Glass door stainless steel handle is usually made of stainless steel, but there are many varieties of stainless steel. 304 stainless steel has very good quality, high gloss, smooth surface, strong and durable. The 201 stainless steel is relatively poor, the surface is dark, it will turn black after a period of use, and the raw material is relatively poor. Pay attention to distinguishing raw materials when purchasing. 2. The standard of glass door stainless steel handle is relatively large, but it should be selected according to the size of the door body when purchasing, not that the larger the standard, the better. The standard of the handle should also match the opening interval of the stainless steel handle of the glass door, otherwise it will not be able to install. 3. If you don't know how to judge the raw materials and quality, you can buy products of well-known brands. This method is more time-saving and labor-saving for friends who have difficulty in selecting. Glass door stainless steel handle device process: process① Choose a glass door stainless steel handle that fits the opening interval of the handle, and check whether the parts and the hole can be closely connected. If it is too tight, use a drill to be careful to expand. If it is too loose, just wrap tape on the part. Process ② First disassemble the stainless steel handle of the glass door, and then assemble it at the handle hole. Apply some glass glue to the direction of the hole. The root of the handle connecting with the glass door is fastened with screws to ensure that it will not loosen. Process ③ After the glass door is connected to the handle, install the other parts of the stainless steel handle of the glass door, and then adjust the horizontal position. The handles on both sides of the door must be aligned, and the handles of the two doors must be aligned. Finally, after checking all parts of the device are stable, it can be used normally.
